BioWorld Foggers and Equipment

 
Junior

Triple

Micro-Jet
Noz-L-Jet
Fog Size
15-40 Micron
15-30 Micron
7-30 Micron
7-30 Micron
Flow Rate
0-4 oz/min
0-10 oz/min
0-10 oz/min
0-10 oz/min
Tank Size
1 Quart
1 Gallon
1 Gallon
1 Gallon
Extension Hose
 
 
 
 
Wand Attachement
 
 
 
Available in 16 or 38 inch
Common Uses
Car Detailing / Small Space
Odor Control
Home / Hotel / Apartment
Odor Control
Disinfectant Application
Spot Treating
Ventilation Application
 

Small Fogger for BioWorld Odor Neutralizer

When a smaller or less expensive fogger is needed, consider the Junior - Model F0335. Among its many uses are:

  • Car detailing
  • Rental car turnarounds
  • Hotel room smoke odors
  • Treat pet stains and odors
  • Control flying insects on patios and lawns
  • Apply BT or soap solutions to gardens
  • Mist cut flowers and interior foliage
  • Apply waxes and shines
  • Soften leather
  • Apply preservatives and lubricants
  • Raise humidity in coolers.

It's easy to use. Twist the power head to detach the tank and pour in your solution. Another half twist and you're ready to go. Switch on the handle to run. Adjust output size, from a fine light fog to a coarse mist, with the rotary valve.

The Junior F0335 -- for those "in between" jobs -- too small for an industrial unit, too large for a trigger sprayer or pump-up.

 

Motor 1/4 Hp, 120VAC, 3 amp; 240VAC, 1.5 amp available Q3'98
Liquid Capacity One quart [950 ml]
Chemicals Any lightweight liquid. Nozzles can atomize both oil-based and water-based fluids.
Particle Size 15-40 microns, adjustable.
Discharge Rate 0-4 oz [120 ml] /min, adjustable
Materials of
Construction
Nozzle and Housing - Nylon
Tank - Polyethylene
Tubing - fuel and oil resistant vinyl
Fittings - brass
Dimensions Height: 10 in [25 cm]
Width: 4.5 in [11 cm]
Length: 11 in [28 cm]
Shipping Weight 5 lb [2 kg] for single unit quantity
Packaging 1, 6, 12 and 18 units
Warranty One year limited warranty

Buy Fogger Now

Triple Nozzle Fogging Unit

The time-proven Triple-Nozzle F8026 fogger serves the needs of a wide range of uses for both indoor and outdoor application. Food plants, hotels, barns, parks and hospitals are just a few examples of sites which depend on the Triple-Nozzle F8026 for effective treatment. (Other styles available).

This pioneering unit, now in its fourth decade of service, provides the standard of reliability against which other foggers are measured. It's in daily use for such diverse applications as controlling odors, disinfecting and sanitizing, carpet mildew control, flood and fire damage restoration, controlling mosquitos, flies and other insects, dispensing water for humidification and dust control and a host of innovative applications.

The portable F8026 is a "cold fogger" -- it handles both water- and oil-based solutions -- and has a one-turn control knob to adjust particle size and degree of misting. The dispensing rate is easy to calibrate in the field to compensate for differences in liquid density or viscosity.

The Triple-Nozzle fogging head can be adjusted at up or down angles as required. Made of durable aluminum, it's lightweight, but tough enough to justify its five-year limited warranty.

Motor 1 Hp, 120V AC/DC, 7 amp   Optional: 240V, 3.5 amp
Fogging Nozzle Three counter-rotating vortex nozzles
Particle Size 15-30 micron VMD, adjustable
Chemicals Handles both oil- and water-based chemical solutions (Liquid viscosity and density affect particle size distribution)
Liquid Flow Rate   0-10 oz/min [0-300 ml/min], adjustable
Tank Capacity 1 gallon [4 liters]
Materials of
Construction
Power head housing and tank - aluminum
Tubing - fuel and oil resistant vinyl
Fittings and control valve - brass
Nozzle - Celcon
Dimensions H x L x Dia: 15.4 x 12.5 x 8.6 in [39 x 32 x 22 cm]
Shipping Weight 12 pounds
Warranty Period Five years

Buy Fogger Now

Fogging Unit Noz-L-Jet #F7087


The Noz-L-Jet F7087L with nozzle fogger features a 36" hose and 16" straight or 38" long curved wand with discharge control. Lightweight and portable, it allows "spot" fogging without filling the room or wasting chemical.
When you want fog, just aim the nozzle and press the thumb valve. It's spring loaded for one-handed operation, but can be latched "on" if you want continuous output. No matter what your task, the Noz-L-Jet's powerful 30 cfm blower makes it quick work.

A separate regulating valve in the power head controls droplet size in the discharge stream. Open up the valve for large mist droplets which settle quickly. Turn it down for small fog particles with longer float times and better penetration.

First developed to apply germicides to air-conditioning ducts, the F7087 has proven useful for other "directed fog" applications including removing smoke odors from draperies and upholstery, applying anti-mildew chemicals beneath carpets, and pest control in restaurants and commercial kitchens (treating wall voids, above ceilings and under appliances without filling the room with fog).


Motor

1 Hp., 120 Volt, 7 amp.   Optional: 240 volt. 3.5 amp

Fogging Nozzle

High shear, counter-rotating vortex design

Range & Size

Visible fog 20-30 feet from end of wand
10-30 micron VMD (dry fog to heavy wet mist)

Liquid Flow Control  

ON/OFF toggle valve on wand.
0-10 oz/min [0-300 ml/min]
One turn control valve

Tank Capacity

1 gallon [4 liters]

Materials of
Construction

Power head housing and tank - aluminum
Tubing - fuel and oil resistant vinyl
Fittings and control valve - brass
Hose & wand - vinyl and aluminum
Nozzle - Celcon

Dimensions

H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm]
Hose: 36"; Wand: 38" long curved

Shipping Weight

15 pounds, in 2 cartons

Warranty Period

Five years

Buy Fogger Now

Versatile Ultra Low Volume Fogger #F1047

The Micro-Jet ULV 1047 fogger allows precise adjustment of particle size, under 7 micron VMD, for ultra low volume application. This allows use of more concentrated fogging solutions, and speeds up treatment time -- at typical ULV application rates, the Micro-Jet covers 2-4,000 cubic feet per minute.)

A 9-turn precision needle valve controls liquid output and droplet size. Set the valve to a low flow rate to produce near-invisible ULV droplets. For heavier fogs and mists, Increase the flow rate. Once the valve has been set, you can use the vernier calibration to return to the same setting, or snap a lock ring to prevent accidental changes.

Chemical flow rate is easily calibrated in the field to adjust for differences in liquid density, viscosity or surface tension. And since the Micro-Jet handles both water- and oil-based liquids, this one machine can satisfy all your fogging requirements.

The Micro-Jet ULV is widely used in schools, restaurants, zoos, barns, hotels, and similar locations requiring professional application. Light-weight, and supported by our five-year limited warranty, the Micro-Jet ULV is an outstanding choice.

Motor

1 Hp, 120VAC 50/60Hz, 7 amp [optional: 240V, 3.5 amp]

Fogging Nozzle

High-shear, counter-rotating vortex design

Range & Size

7- 30 micron VMD, adjustable
(ultra fine, dry fog to heavy, wet fog)

Liquid Flow Control  

0-10 oz/min [0-300 ml/min]
Nine turn vernier valve
Valve lock feature

Chemicals

Water- and oil-based solutions

Tank Capacity

1 gallon [4 liters]

Materials of
Construction

Stainless steel fittings
Tank with float valve (brass; 1/4" compression fitting)
Stainless steel tank (avail Q2 2003)

 

Dimensions

H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm]

Shipping Weight

12 pounds [6 kg]

Warranty Period

Five years

Buy Fogger Now

 
Pow-R-Fog
Pow-R-Fog Plus
Micro-Fog
Fog Size
30 micron
15-30 micron
7-30 micron
Flow Rate
10 oz/min
0-10 oz/min
0-10 oz/min
Adjustable Flow
 
 
 
Common Use
Misting and Humidifying
Sanitizing, odor control
insect control, and humidification
waste treatment plants, paper mills, warehouses, and food storage centers
 

Micro-Fog DT 1247
ULV Fogger For Large Areas

Now, with motor-saver brushes for extended use applications
The Micro-Fog DT 1247 drum mounted unit features precision control of particle size, from a dry, 7-micron ULV (ultra low volume) droplet to the larger particles of conventional fogging and misting equipment.
ULV application provides greater penetration and diffusion of fog particles, allowing more concentrated solutions to be used and shortening application times. Also, the higher surface to volume ratio of small droplets makes them superior for odor control and other gas contact applications.
With precision control and variable output (0-10 oz/min), the Micro-Fog DT 1247 can handle both oil- or water-based solutions. It is easily calibrated in the field to accommodate differences in solution viscosity and density. Application sites include waste treatment plants, paper mills, parks, warehouses, and food storage centers.
Micro-Fog DT 1247 -- technologically advanced fogging, with controlled flow and particle size.


Motor

1 Hp., 120VAC 50/60Hz, 7 amp. Optional: 240VAC, 3.5 amp

Fogging Nozzle

High-shear, vortex design nozzle

Particle Size

7-30 micron VMD, adjustable

Chemicals

Water- and oil-based solutions

Liquid Flow Rate

0-10 oz/min [0-300 ml/min], adjustable
Nine-turn vernier control valve, memory lock

Capacity

Mounts to chemical drum (not included)

Materials of
Construction

Power head, drum adapter - aluminum
Tubing - fuel and oil resistant vinyl
Control valve - glass filled nylon, stainless stem, Viton® seal
Fittings - brass
Nozzle - Celcon

Dimensions

H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm]

Shipping Weight

12 pounds

Warranty Period

One year

Buy Fogger Now

 


Pow-R-Fog DT 9236 Drum Service Misting Unit

Now, with motor saver brushes for extended use applications.
Large volume users will find the automatic dispersal of the Pow-R-Fog DT 9236 unit an easy, affordable method of fogging.
With a preset output rate, this unit conveniently applies chemicals, deodorants and other solutions as a heavy, wet fog. The Pow-R-Fog DT can use either water- and oil-based solutions. It is ideal for use in industry, waste treatment plants, asbestos removal areas ... wherever misting and wetting are desired.
The Pow-R-Fog DT -- dependable, cost-efficient equipment for large volume fogging.


Motor

1 Hp, 120VAC 50/60Hz, 7 amp Optional: 240V, 3.5 amp

Fogging Nozzle

High-shear, vortex design nozzle

Particle Size

Wet mist (30 micron VMD)

Chemicals

Water- and oil-based solutions

Liquid Flow Rate

10 oz/min [300 ml/min], not adjustable

Capacity

Mounts to chemical drum (not included)

Materials of
Construction

Power head housing and drum adapter - aluminum
Tubing - fuel and oil resistant vinyl
Fittings - brass
Nozzle - Celcon

Dimensions

H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm]

Shipping Weight

12 pounds

Warranty Period

One year

Buy Fogger Now

 


Pow-R-Fog Plus DT 8246

Controllable Drum Mounted Fogger/Mister
The Pow-R-Fog Plus DT 8246 is mechanically identical to the durable 9236 model, but includes a one-turn control valve to allow you to adjust liquid output (0-10 oz/min) and droplet size (intermediate fog to heavy wet fog). Higher flows produce larger droplets.
The dispensing rate can be calibrated in the field so you get predictable output for all fogging solutions, despite changes in viscosity and density. And, since the Pow-R-Fog Plus DT is a "cold" fogger, using shear turbulence, it handles both water- and oil-based liquids.
Barns, restaurants, greenhouses, dairies and warehouses are a few examples of larger application sites relying on this product for everyday use.


Motor

1 Hp., 120VAC 50/60HZ, 7 amp. Optional: 240V, 3.5 amp
Motor saver brushes (protect commutator when worn)

Fogging Nozzle

High-shear, vortex design nozzle

Particle Size

15-30 micron VMD, adjustable

Chemicals

Water- and oil-based solutions

Liquid Flow Rate

0-10 oz/min [0-300 ml/min], adjustable with one-turn valve

Capacity

Mounts to chemical drum (not included)

Materials of
Construction

Power head, drum adapter - aluminum
Tubing - fuel and oil resistant vinyl
Fittings and control valve - brass
Nozzle - Celcon

Dimensions

H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm]

Shipping Weight

12 pounds

Warranty Period

One year

Buy Fogger Now

Custom Large Scale Project Systems