BioWorld Foggers and Equipment

                               

Product #F0335              Product #F8026              Product #F1047

                  

Product #F7087L                  Product #F7087S


Industrial Drum Mounted Foggers

                              

Micro-Fog DT 1247           Pow-R-Fog DT 9236           Pow-R-Fog Plus DT 8246


Custom Large Scale Project Systems


                    

Odor Control Fogger Systems

 

View Our Return Policy



Small Fogger for BioWorld Odor Neutralizer

(Back to Top)

When a smaller or less expensive fogger is needed, consider the Junior - Model F0335. Among its many uses are:

  • Car detailing
  • Rental car turnarounds
  • Hotel room smoke odors
  • Treat pet stains and odors
  • Control flying insects on patios and lawns
  • Apply BT or soap solutions to gardens
  • Mist cut flowers and interior foliage
  • Apply waxes and shines
  • Soften leather
  • Apply preservatives and lubricants
  • Raise humidity in coolers.

It's easy to use. Twist the power head to detach the tank and pour in your solution. Another half twist and you're ready to go. Switch on the handle to run. Adjust output size, from a fine light fog to a coarse mist, with the rotary valve.

The Junior F0335 -- for those "in between" jobs -- too small for an industrial unit, too large for a trigger sprayer or pump-up.

 

Motor 1/4 Hp, 120VAC, 3 amp; 240VAC, 1.5 amp available Q3'98
Liquid Capacity One quart [950 ml]
Chemicals Any lightweight liquid. Nozzles can atomize both oil-based and water-based fluids.
Particle Size 15-40 microns, adjustable.
Discharge Rate 0-4 oz [120 ml] /min, adjustable
Materials of
Construction
Nozzle and Housing - Nylon
Tank - Polyethylene
Tubing - fuel and oil resistant vinyl
Fittings - brass
Dimensions Height: 10 in [25 cm]
Width: 4.5 in [11 cm]
Length: 11 in [28 cm]
Shipping Weight 5 lb [2 kg] for single unit quantity
Packaging 1, 6, 12 and 18 units
Warranty One year limited warranty

 

Buy One Now

 


Triple Nozzle Fogging Unit

(Back to Top)

The time-proven Triple-Nozzle F8026 fogger serves the needs of a wide range of uses for both indoor and outdoor application. Food plants, hotels, barns, parks and hospitals are just a few examples of sites which depend on the Triple-Nozzle F8026 for effective treatment. (Other styles available).

This pioneering unit, now in its fourth decade of service, provides the standard of reliability against which other foggers are measured. It's in daily use for such diverse applications as controlling odors, disinfecting and sanitizing, carpet mildew control, flood and fire damage restoration, controlling mosquitos, flies and other insects, dispensing water for humidification and dust control and a host of innovative applications.

The portable F8026 is a "cold fogger" -- it handles both water- and oil-based solutions -- and has a one-turn control knob to adjust particle size and degree of misting. The dispensing rate is easy to calibrate in the field to compensate for differences in liquid density or viscosity.

The Triple-Nozzle fogging head can be adjusted at up or down angles as required. Made of durable aluminum, it's lightweight, but tough enough to justify its five-year limited warranty.

Motor 1 Hp, 120V AC/DC, 7 amp   Optional: 240V, 3.5 amp
Fogging Nozzle Three counter-rotating vortex nozzles
Particle Size 15-30 micron VMD, adjustable
Chemicals Handles both oil- and water-based chemical solutions (Liquid viscosity and density affect particle size distribution)
Liquid Flow Rate   0-10 oz/min [0-300 ml/min], adjustable
Tank Capacity 1 gallon [4 liters]
Materials of
Construction
Power head housing and tank - aluminum
Tubing - fuel and oil resistant vinyl
Fittings and control valve - brass
Nozzle - Celcon
Dimensions H x L x Dia: 15.4 x 12.5 x 8.6 in [39 x 32 x 22 cm]
Shipping Weight 12 pounds
Warranty Period Five years

 

Buy One Now

 


Micro-Jet Fogging Unit
ULV Fogger For Large Areas

(Back to Top)

Now, with motor-saver brushes for extended use applications
The Micro-Jet® 1047 unit features precision control of particle size, from a dry, 7-micron ULV (ultra low volume) droplet to the larger particles of conventional fogging and misting equipment.
ULV application provides greater penetration and diffusion of fog particles, allowing more concentrated solutions to be used and shortening application times. Also, the higher surface to volume ratio of small droplets makes them superior for odor control and other gas contact applications.
With precision control and variable output (0-10 oz/min), the Micro-Jet can handle both oil- or water-based solutions. It is easily calibrated in the field to accommodate differences in solution viscosity and density. Application sites include waste treatment plants, paper mills, parks, warehouses, and food storage centers.

The Micro-Jet 1047 -- technologically advanced fogging, with controlled flow and particle size.


Motor

1 Hp., 120VAC 50/60Hz, 7 amp.   Optional: 240VAC, 3.5 amp

Fogging Nozzle

High-shear, vortex design nozzle

Particle Size

7-30 micron VMD, adjustable

Chemicals

Water- and oil-based solutions

Liquid Flow Rate  

0-10 oz/min [0-300 ml/min], adjustable
Nine-turn vernier control valve, memory lock

Tank Capacity

1 gallon (4 liters)

Materials of
Construction

Power head, drum adapter - aluminum
Tubing - fuel and oil resistant vinyl
Control valve - glass filled nylon, stainless stem, Viton® seal
Fittings - brass
Nozzle - Celcon

Dimensions

H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm]

Shipping Weight

12 pounds

Warranty Period

One year

 

Buy One Now

 


Fogging Unit Noz-L-Jet #F7087L

(Back to Top)

The Noz-L-Jet F7087L with nozzle fogger features a 36" hose and 38" long curved wand with discharge control. Lightweight and portable, it allows "spot" fogging without filling the room or wasting chemical.
When you want fog, just aim the nozzle and press the thumb valve. It's spring loaded for one-handed operation, but can be latched "on" if you want continuous output. No matter what your task, the Noz-L-Jet's powerful 30 cfm blower makes it quick work.
A separate regulating valve in the power head controls droplet size in the discharge stream. Open up the valve for large mist droplets which settle quickly. Turn it down for small fog particles with longer float times and better penetration.
First developed to apply germicides to air-conditioning ducts, the F7087 has proven useful for other "directed fog" applications including removing smoke odors from draperies and upholstery, applying anti-mildew chemicals beneath carpets, and pest control in restaurants and commercial kitchens (treating wall voids, above ceilings and under appliances without filling the room with fog).


Motor

1 Hp., 120 Volt, 7 amp.   Optional: 240 volt. 3.5 amp

Fogging Nozzle

High shear, counter-rotating vortex design

Range & Size

Visible fog 20-30 feet from end of wand
10-30 micron VMD (dry fog to heavy wet mist)

Liquid Flow Control  

ON/OFF toggle valve on wand.
0-10 oz/min [0-300 ml/min]
One turn control valve

Tank Capacity

1 gallon [4 liters]

Materials of
Construction

Power head housing and tank - aluminum
Tubing - fuel and oil resistant vinyl
Fittings and control valve - brass
Hose & wand - vinyl and aluminum
Nozzle - Celcon

Dimensions

H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm]
Hose: 36"; Wand: 38" long curved

Shipping Weight

15 pounds, in 2 cartons

Warranty Period

Five years

 

Buy One Now

 


Fogging Unit Noz-L-Jet #F7087S

(Back to Top)

The Noz-L-Jet F7087S with nozzle fogger features a 36" hose and 16" straight wand with discharge control. Lightweight and portable, it allows "spot" fogging without filling the room or wasting chemical.
When you want fog, just aim the nozzle and press the thumb valve. It's spring loaded for one-handed operation, but can be latched "on" if you want continuous output. No matter what your task, the Noz-L-Jet's powerful 30 cfm blower makes it quick work.
A separate regulating valve in the power head controls droplet size in the discharge stream. Open up the valve for large mist droplets which settle quickly. Turn it down for small fog particles with longer float times and better penetration.
First developed to apply germicides to air-conditioning ducts, the F7087S has proven useful for other "directed fog" applications including removing smoke odors from draperies and upholstery, applying anti-mildew chemicals beneath carpets, and pest control in restaurants and commercial kitchens (treating wall voids, above ceilings and under appliances without filling the room with fog).


Motor

1 Hp., 120 Volt, 7 amp.   Optional: 240 volt. 3.5 amp

Fogging Nozzle

High shear, counter-rotating vortex design

Range & Size

Visible fog 20-30 feet from end of wand
10-30 micron VMD (dry fog to heavy wet mist)

Liquid Flow Control  

ON/OFF toggle valve on wand.
0-10 oz/min [0-300 ml/min]
One turn control valve

Tank Capacity

1 gallon [4 liters]

Materials of
Construction

Power head housing and tank - aluminum
Tubing - fuel and oil resistant vinyl
Fittings and control valve - brass
Hose & wand - vinyl and aluminum
Nozzle - Celcon

Dimensions

H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm]
Hose: 36"; Wand: 16" short straight

Shipping Weight

15 pounds, in 2 cartons

Warranty Period

Five years

 

Buy One Now

 


Micro-Fog DT 1247
ULV Fogger For Large Areas

(Back to Top)

Now, with motor-saver brushes for extended use applications
The Micro-Fog DT 1247 drum mounted unit features precision control of particle size, from a dry, 7-micron ULV (ultra low volume) droplet to the larger particles of conventional fogging and misting equipment.
ULV application provides greater penetration and diffusion of fog particles, allowing more concentrated solutions to be used and shortening application times. Also, the higher surface to volume ratio of small droplets makes them superior for odor control and other gas contact applications.
With precision control and variable output (0-10 oz/min), the Micro-Fog DT 1247 can handle both oil- or water-based solutions. It is easily calibrated in the field to accommodate differences in solution viscosity and density. Application sites include waste treatment plants, paper mills, parks, warehouses, and food storage centers.
Micro-Fog DT 1247  -- technologically advanced fogging, with controlled flow and particle size.


Motor

1 Hp., 120VAC 50/60Hz, 7 amp.   Optional: 240VAC, 3.5 amp

Fogging Nozzle

High-shear, vortex design nozzle

Particle Size

7-30 micron VMD, adjustable

Chemicals

Water- and oil-based solutions

Liquid Flow Rate  

0-10 oz/min [0-300 ml/min], adjustable
Nine-turn vernier control valve, memory lock

Capacity

Mounts to chemical drum (not included)

Materials of
Construction

Power head, drum adapter - aluminum
Tubing - fuel and oil resistant vinyl
Control valve - glass filled nylon, stainless stem, Viton® seal
Fittings - brass
Nozzle - Celcon

Dimensions

H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm]

Shipping Weight

12 pounds

Warranty Period

One year

 

Buy One Now

 


Pow-R-Fog DT 9236 Drum Service Misting Unit

(Back to Top)

Now, with motor saver brushes for extended use applications.
Large volume users will find the automatic dispersal of the Pow-R-Fog DT 9236 unit an easy, affordable method of fogging.
With a preset output rate, this unit conveniently applies chemicals, deodorants and other solutions as a heavy, wet fog. The Pow-R-Fog DT can use either water- and oil-based solutions. It is ideal for use in industry, waste treatment plants, asbestos removal areas ... wherever misting and wetting are desired.
The Pow-R-Fog DT -- dependable, cost-efficient equipment for large volume fogging.


Motor

1 Hp, 120VAC 50/60Hz, 7 amp   Optional: 240V, 3.5 amp

Fogging Nozzle

High-shear, vortex design nozzle

Particle Size

Wet mist (30 micron VMD)

Chemicals

Water- and oil-based solutions

Liquid Flow Rate  

10 oz/min [300 ml/min], not adjustable

Capacity

Mounts to chemical drum (not included)

Materials of
Construction

Power head housing and drum adapter - aluminum
Tubing - fuel and oil resistant vinyl
Fittings - brass
Nozzle - Celcon

Dimensions

H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm]

Shipping Weight

12 pounds

Warranty Period

One year

 

Buy One Now

 


Pow-R-Fog Plus DT 8246

(Back to Top)

Controllable Drum Mounted Fogger/Mister
The Pow-R-Fog Plus DT 8246 is mechanically identical to the durable 9236 model, but includes a one-turn control valve to allow you to adjust liquid output (0-10 oz/min) and droplet size (intermediate fog to heavy wet fog). Higher flows produce larger droplets.
The dispensing rate can be calibrated in the field so you get predictable output for all fogging solutions, despite changes in viscosity and density. And, since the Pow-R-Fog Plus DT is a "cold" fogger, using shear turbulence, it handles both water- and oil-based liquids.
Barns, restaurants, greenhouses, dairies and warehouses are a few examples of larger application sites relying on this product for everyday use.


Motor

1 Hp., 120VAC 50/60HZ, 7 amp.   Optional: 240V, 3.5 amp
Motor saver brushes (protect commutator when worn)

Fogging Nozzle

High-shear, vortex design nozzle

Particle Size

15-30 micron VMD, adjustable

Chemicals

Water- and oil-based solutions

Liquid Flow Rate  

0-10 oz/min [0-300 ml/min], adjustable with one-turn valve

Capacity

Mounts to chemical drum (not included)

Materials of
Construction

Power head, drum adapter - aluminum
Tubing - fuel and oil resistant vinyl
Fittings and control valve - brass
Nozzle - Celcon

Dimensions

H x L x Dia: 15.4 x 10.4 x 8.6 in [39 x 26 x 22 cm]

Shipping Weight

12 pounds

Warranty Period

One year

Buy One Now

Contact Info

  • sales [at] bioworldusa [dot] com
  • support [at] bioworldusa [dot] com
  • billing [at] bioworldusa [dot] com
  • US Toll-Free: 1-800-882-0225
  • International: 1-559-651-2042